Can A Dead Computer Be Saved?

Posted on: 26 March 2020


It's a common scenario in the world of computer hardware repair. The customer says the machine is just dead. It simply will not turn on, no matter what they try.

The first question that usually follows is, "Can you fix it?" While there are no guarantees in the world of hardware repair, here are four reasons why the answer to this question might be, "Yes."

Dead Power Supply

Nearly all modern computers utilize some form of modular design for supplying power. There is usually a box in the back of the tower that's where you would normally plug the system in. This box is the power supply, and it is designed in almost all models of computers to be replaceable.

A hardware repair technician might swap the power supply out for one they have lying around just to check whether this is the problem. If it is, then they will order a more appropriate one and put it in.

Failing Processor

The CPU, the main processing system in all consumer and office computers, is another component that can shut a computer down all on its own. CPUs oftentimes show signs of failure as they age because internal components will overheat and fail. This means the problem can frequently be diagnosed just by asking the machine's owner whether there have been sporadic failures, shutdowns, restarts, and other problems recently.

Bad Motherboard

All the parts in a computer have to be tied together to work as a single system. The component that ties everything together is called the motherboard. If you look inside your machine, you'll see a big square thing that takes up most of the side or the bottom of the case. This is the motherboard. When it goes bad, it can exhibit similar sporadic problems to a failing CPU.

Unless there's a compelling reason to not do so, the standard solution is to remove the old motherboard and replace it with one that's compatible with all of the other components.

A Broken Button

Have you ever heard the saying that the simplest tricks are the best tricks? Well, this is one of those deals. A small bit of wiring runs from the power button, usually on the front panel of a system, to the machine's motherboard. Pressing the button closes a contact and tells the computer to either turn on or off. It's one of the more mechanical components in a computer, and it can just wear out. Fortunately, a button can usually be replaced.

To learn more, reach out to a computer hardware repair service near you,